Chemicorp Inc. Represents the materials of Saco Polymers (Before Padanaplast USA), and has a wide range of crosslinked XLPE, both with and without flame retardance properties.
1. Pexidan® U/T:
non-flame retardant applications and UL listed for USE (Underground Service Entrance) and USE-2 per UL 854.
2. Pexidan® R/T:
non-flame retardant applications and CSA listed for RW-90 and RWU-90 per CSA C22.2 No. 38.
3. Pexidan® X/T:
flame retardant applications. UL listed for XHHW, XHHW-2, RHH, RHW-2 & SIS per UL 44 and for USE and USE-2 per UL 854.
4. Pexidan® X/T-UV2
flame retardant applications. UL listed for XHHW, XHHW-2, RHH, RHW-2 & SIS per UL 44 and for USE and USE-2 per UL 854.
5. Pexidan® V/T
flame retardant applications. UL listed for XHHW, XHHW-2, RHH, RHW-2 & SIS per UL 44. Complies with requirements for wires marked VW-1 per UL 44.
6. Pexidan® V/T-2
flame retardant applications. UL listed for XHHW, XHHW-2, RHH, RHW-2 & SIS per UL 44. Complies with requirements for wires marked VW-1 per UL 44. Complies with IEEE 1202 for 1/0 and larger cables.
7. Pexidan® H/T
flame retardant applications requiring temperature ratings up to 150°C. Suitable for UL AWM applications with 125°C and 150°C ratings per UL 758. FT-2 (horizontal) flammability rating.
8. Pexidan® J/T:
Low density polyethylene based compound for automotive primary insulation applications requiring temperature ratings up to 125°C. Suitable for SAE J1128 types, TXL, SXL & GXL.
1. PEXIDAN® L/T: for hot & cold water plumbing systems, hydronic heating, water service, fire sprinkler, gas and chemical process piping. Complies with NSF Standard 14, which includes Standard 61, and CSA B137.5 NSF and PPI listed as PEX 5006, exceeding oxidative stability requirements for commercial hot water re-circulating systems (CL-5) as per ASTM F876. Complies with AWWA C-904 for water service applications.
2. PEXIDAN® L/T ECLIPSE: Version of Pexidan® L/T with superior protection against Ultraviolet (UV) light. Complies with NSF Standard 14, which includes Standard 61, and CSA B137.5 NSF listed as PEX 5306. This compound meets requirements of ASTM F876 for outdoor exposure of up to 6 months while maintaining Cl-5 oxidative stability.
We offer solutions that meet your most demanding requirements, including high stiffness, ESCR performance, reduced part weight, and lower scrap rates.
The references that are mostly used are:
1. Superlink ™: 110 rotomolding crosslinkable resins were developed by Ingenia for the manufacture of parts to offer a unique combination of high stiffness, low temperature impact properties and superior ESCR performance. Superlink ™ 110 is UV stabilized for outdoor service and is available in natural, black and standard colors.
2. Rototuf ™: brand of precolored resins allow for accurate color matching combined with consistent color production. The end result – less color rejections and lower scrap rates.
3. Ingenia’s Rotolite ™: single shot PE foam system consists of a powdered skin material (available in natural, black, white and custom colors) and a foamable pellet for the core. Both are dropped in the mold simultaneously. In the oven, the skin material coats the mold wall, while the foam expands to fill the interior of the part. The foam core has a typical density of 10 lbs/ft3 and compressive modulus of 1600 psi.
